Gilbert 1999GT-230 Скачать руководство пользователя

Страница: 13 / 15

4220

6049

(3)

6027

TRAY

6064

SEE DETAIL A

4582

6003

4514

SIDE

COVER

5005 (2)

GROUND LABEL: GROUND

GROUND TERMINAL:

8-32x3/8" RHMS SECURED BY

8-32 HEX NUT

DETAIL A

10 1/2"

5 1/2"

28"

6062

4043

22"

6007

(6)

4528-S (2)

4530-S

(2)

MODEL: Gilbert® 219GT-230 "Sticky Tiger"

See Parts List (Page 15) For Part Descriptions

INSTALLATION INSTRUCTIONS

1. THIS UNIT IS DESIGNED FOR INDOOR

USE ONLY.

2. LAMPS SHOULD BE IN A HORIZONTAL

POSITION WHEN UNIT IS PROPERLY IN-

STALLED.

3. USING A LEVEL AND PENCIL, DRAW A

SRAIGHT 17" LINE 24"-48" ABOVE FLOOR.

COME IN 1/4" FROM ONE END AND MARK

ACROSS THAT LINE. MEASURE 16" FROM

THAT POINT AND MAKE A SECOND MARK.

MOUNT THE TWO SCREWS (PROVIDED) AT

THE CROSSPOINTS, LEAVING 1/2" OF THE

SCREW STICKING OUT. SLIDE UNIT ONTO

MOUNTING SCREWS AND CONNECT TO

AC POWER.

NOTE: IF MOUNTING ON MASONRY, USE A

3/16" BIT (NOT PROVIDED) AND DRILL OUT

THE TWO CROSS MARKS AND INSERT THE

TWO PLASTIC ANCHORS (PROVIDED) BE-

FORE MOUNTING THE TWO SCREWS.

4. USE AS FREE-STANDING PORTABLE

(HANDLE AND 3 MAR-RESISTANT FEET).

The 219GT-230 Sticky Tiger™ has key

hole slots located on back for wall instal-

lation (usually mounted approximately 24"

above floor). The Tiger may also be used

as a free-standing portable (see Guerrilla

portable use instructions at left). A 2nd (op-

tional) glueboard can be wedged into holder

behind top lamp and folded at dotted-line to

help retain glue.

Model 219GT-230 Sticky Tiger™

PROFESSIONAL GLUEBOARD LIGHT TRAPS

INSTALLATION AND APPLICATION

REMOVE ALL PACKING MATERIALS BEFORE INSTALLATION

Gilbert® has had superior trap designs since Don Gilbert built the first, truly professional flytrap in 1967.

Yet, he maintained, it was not his trap designs, but his philosophy that was most responsible for his success.

Don (and his distributors) were so successful at it, Gilbert® was granted a registered trademark.

Содержание 1999GT-230
















Результаты поиска

Содержание 1999GT-230

Отзывы:

Похожие инструкции для 1999GT-230

Бренды по названию

Популярные бренды

Gilbert 1999GT-230, Руководство пользователя

Результаты поиска

Содержание 1999GT-230

Отзывы:

Похожие инструкции для 1999GT-230

Бренды по названию

Популярные бренды