manualshive.com logo in svg
background image

6998  #1211                                                          Printed with Soy Ink on Recycled Paper

OWNER'S MANUAL

INSTALLATION • OPERATION • PARTS

For Models: 711-230, 601T-230, 601E-230, 220-230, 607-230, 705-230, 605-230

2000GT-230, 2002GT-230, 1999GT-230, 225GT-230, 601GT-230, 219GT-230, 747GT-230

CAUTION: All Repairs Must Be Performed By Qualified Personnel

READ THIS FIRST

Before use, inspect the unit for in transit damage. Report any dam-

age to the delivering carrier for immediate "claim for damage" to 

the unit. Before returning a unit for repair, notify your distributor or 

factory for return  authorization. Do not discard the box and packing 

material until you are certain the unit is in good working order.

                                    

PHONE 870-932-6070  FAX 870-932-5609

 Gilbert Industries, Inc.

5611 Krueger Drive, Jonesboro, Arkansas 72401 U.S.A.

When locating traps, remember that UV light will color-fade wall paper, 

fabrics, etc. Once installed, make sure the safety switch actuator is 

engaged by either closing the guard or securing the tray, depending 

on the particular model. All electrocuting light traps have one such 

safety switch. If lamp flickers, try reversing the lamp(s).

PROFESSIONAL FLYTRAPS

®

Gilbert

www.gilbertinc.com

LIMITED 1 YEAR WARRANTY

To the original purchaser of a new 230 volt Gilbert® Insect Light Trap, we 

warrant that we will replace or repair free of charge any part found by us to 

be defective in factory workmanship or material for a period of one year from 

date of purchase. This replacement or repair of defective parts shall constitute 

the sole and exclusive remedy of the original purchaser. THE FOREGOING 

WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER EXPRESS 

OR IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF 

MERCHANTABILITY OR FITNESS, AND OF ANY OTHER OBLIGATION ON 

THE PART OF GILBERT INDUSTRIES, INC. IN NO EVENT SHALL GILBERT 

INDUSTRIES, INC. BE LIABLE FOR ANY SPECIAL, CONSEQUENTIAL, OR 

INCIDENTAL DAMAGES, nor for damage due to accident, abuse, lack of 

reasonable care, normal wear, unauthorized repair or operation on a power 

source other than 230 volt, 50 Hertz. The provisions of this warranty shall be 

governed by and construed under the laws of the state of Arkansas.

Hg - LAMPS CONTAIN MERCURY

MANAGE IN ACCORD WITH DISPOSAL LAWS

See: www.lamprecycle.org or 1- 800-643-0400

Содержание 1999GT-230
















Отзывы: