Dispenser Setup
Tuning Antennas
Page 7-8 MDE-3664B TRIND® Start-up, Service, and Parts Manual · June 2013
4
On Card Cage, move the three position “tune” toggle switch from the center position to “A”.
Figure 7-8: Tune Toggle Switch Location
“Tune” toggle switch location
5
Connect the leads on the multimeter to field strength sensor. Set the meter to the DC voltage
range.
6
By fine adjustments to variable inductor, set to the highest DC voltage reading.
Note: Voltage will peak at a point between 12 VDC and 20 VDC, and then decrease with turns
in either direction. Set at peak.
7
Repeat steps
on
through
8
When finished, return the tune toggle switch to the center position.