MDE-5224F
6
SECTION 3 - REMOVING COMPONENTS
3
Left Option Door
To remove the left option door:
1
Open the main door by loosening the lower screws that secure the lower portion of the main door and
then open the left and right option doors. Release the four main door latches.
2
Disconnect all the cables from the left option door, CRIND display, card reader, and Contactless Smart
Card (CSC) antenna (if applicable).
Note: Discard the CSC antenna cables as they cannot be reused.
Figure 1: Opening Left Option Door
3
Remove the left option door by pulling the hinge pin up through the hole.
Note: The left option and the main door must be open to gain access to the hinge pin.
4
Remove any existing old gaskets on the option door opening using a putty knife or scraping tool.
5
Remove any customer supplied locks and add to the new option door.
