GILBARCO VEEDER-ROOT FlexPay Encrypting PIN Pad, Руководство по запуску и обслуживанию, Страница: 41 / 86

MDE-4784D FlexPay™ Encrypting PIN Pad Start-up and Service Manual · December 2011 Page 37
Using the FlexPay EPP Mapping Tool Start-up and Service
Configuring the FlexPay EPP Mapping Tool
To configure the FlexPay EPP Mapping Tool, proceed as follows:
1
Select the required template from the options available (see Figure 3-34 on page 40 ).
2
Click Config . The Config window appears.
3
Open and edit the items under “Edit File Filters”, which can be selected in the combos when
opening or modifying an existing map.
Figure 3-31: Config Window
File Filters
4 Click Rebuild All to reset all viewing filters based on the files in the key map, after you select
one of the files from the directory in which key map files are present.
Note: This function will delete all previous filters and rebuild all filters based on the file
names in the directory you select.
Perform steps 3 and 4 only if instructed to do so by a Gilbarco Support Associate.
IMPORTANT INFORMATION
5
In “Communication”, select the COM Port that the FlexPay EPP is connected to, from the list
of options available.
Note: The COM Port is used to connect the FlexPay EPP to the laptop containing the FlexPay
EPP Mapping Tool application.