manualshive.com logo in svg

GILBARCO VEEDER-ROOT FlexPay Encrypting PIN Pad, Руководство по запуску и обслуживанию, Страница: 15 / 86

Поделиться
Скачать
GILBARCO VEEDER-ROOT FlexPay Encrypting PIN Pad Скачать руководство пользователя страница 15

MDE-4784D FlexPay™ Encrypting PIN Pad Start-up and Service Manual · December 2011

Page 11

Start-up Procedure for the FlexPay EPP

Start-up and Service

3 – Start-up and Service

This chapter provides start-up, service, and troubleshooting instructions for the FlexPay EPP.

These procedures must be performed by a Gilbarco ASC who is trained to service the FlexPay 
EPP.

Always wear proper eye protection when servicing the dispenser.

WARNING

AC or battery powered drills must not be used at the dispensing unit. There exists a 
danger of explosion or fire due to the presence of hazardous vapors.

WARNING

!

Start-up Procedure for the FlexPay EPP

Before you begin, read and understand all safety information found in MDE-3804 

 

Encore/Eclipse Start-Up/Service Manual.

Inform the Manager that the power will be removed and remove all power supplied to the 
dispenser at the breaker located in the building. Block off the dispenser from customers.

To start up the FlexPay EPP in a factory-installed dispenser, proceed as follows:

1

Remove power to the dispenser. Follow OSHA Lock-out and Tag-out procedures.

Failure to turn off the unit during the installation of the kit may cause injury or bodily harm from 
electrical shock. Ensure that all power to the unit is switched off before opening the door to the 
unit and during kit installation.

WARNING

2

Open the main door (or lower door followed by the main door for Encore S dispensers).

3

Isolate the Two-wire cable.

4

Ensure that all FlexPay EPP cables are connected appropriately and secured.

5

Restore power to the dispenser.

Содержание FlexPay Encrypting PIN Pad























































































Отзывы:

Нет отзывов