Capricorn Outdoor CPE Installation Guide
4
Proprietary to Gilat Satellites Networks Ltd.
DCP0000212(B)
Connecting Power Cable
1.
Use only the DC power cable supplied by Gilat - CB102271.
2.
Connect the cable to the modem DC IN port using the bayonet connector.
3.
Connect the other side to the power source. Verify that a fuse of at 4 AMP is used at
the power source.
Warning
P
OWER CABLE ASSEMBLY AND CONNECTION SHOULD BE PERFORMED ONLY BY A
CERTIFIED ELECTRICIAN
.
C
AUTION
D
O NOT OPEN BUILT
-
IN CONNECTORS UNDER ANY CIRCUMSTANCES
.
C
AUTION
A
FTER COMPLETING THE ASSEMBLY
,
VERIFY THAT ALL CABLE CONNECTORS ARE
FIRMLY TIGHTENED AND THERE ARE NO LOOSE CONNECTIONS
.
Fitting Outdoor Modem and Securing Terminal
1.
Place the Outdoor modem on the pivot mount located on one of the tripod legs
ensuring the spigot is located in the positioning hole.
Figure 4: Fitting Outdoor Modem
2.
Use stakes or sandbags to stabilize the terminal by applying these measures to the
extremes of the tripod legs. Ensure the sandbags (if used) only cover the feet of the
tripod and not the legs, to avoid damage to the legs. The application of stakes or
sandbags is especially important during windy conditions.
