Gigawave D-Cam Clip-On, Руководство оператора

Страница: 26 / 30

D-Cam Clip-On Operators Manual Issue 1 Page 26 of 26
UNUM-CCAM -0104
6 System Monitoring / Setup
Using a PC running Hyper Terminal or other terminal emulator, the D-Cam Clip-On can be
configured without the use of the operator controls and LCD display. The current
configuration can also be obtained via this RS232 interface.
When the D-Cam Clip-On is under the control of the Remote Interface the operator
controls will not function when a menu has been entered.
Set the terminal emulation for RS232, 19200 Baud, 8bit, 1 stop, No parity. A simple menu
is used to configure the appropriate D-Cam Clip -On parameter.
6.1 Main Menu
The ‘Gigawave Menu’ is intended for Gigawave personnel only. A password is required to
allow us of these features.
All other menus are entered by pressing the appropriate key. At any point
‘h’ can be used
to print the available options.
********************************************************************************
GIGAWAVE Ltd
D -CAM
CLIPON UNIT
PBSW-TDDB-0102-03
********************************************************************************
MAIN ME NU
c : Program Channels
g : Gigawave Menu
h : Help
m : MPEG PSET
s : Dump Setup
u : Unit Name
>