Gigawave D-Cam Clip-On, Руководство оператора

Страница: 20 / 30

D-Cam Clip-On Operators Manual Issue 1 Page 20 of 20
UNUM-CCAM -0104
5 D-Cam Clip-On Transmitter
The D-Cam Clip-On is based upon the highly successful Gigawave D-Cam dockable
Wireless Camera system. Internally, it is very different!
Gigawave engineers have completely redesigned the D-Cam to compress all the circuitry
on from five circuit boards onto two. This greatly reduces space and weight compared
with the original D-Cam product.
The result is a Digital Wireless Camera system, which has exceptional RF performance, is
well-balanced and easy to use.
The D-Cam Clip-On contains four circuit board assemblies:
•
Audio / Video Encoder PBAB-TDAV-0102
•
COFDM Modulator PBAB-TDVM-0302
•
RF Power Amplifier PBAB-TDPA-0801
•
Display / System Controller PBAB-TDDB-0101
The superior RF performance of the D-Cam Clip-On when combined with a MVL -D Series
Receiver is such that it requires only a single receive point with Fanbeam antenna for most
normal OB locations, including sports stadiums.
5.1 Connector Pin Outs
5.1.1 SDI / CVBS Video BNC
Either SDI or composite video, blanking & sync (CVBS) input. Switched via controller
dependant upon Video Input Selection. See 3.4.3
75
Ω
BNC connector
5.1.2 Video Connector
Com posite (CVBS) / YC / YUV
6Pin Lemo Plug FGG.1B.306.CLAD62Z
Pin CVBS YC YUV
1 0V Y(0v) Y(0v)
2 CVBS Y Y
3 C(0v) U(0v)
4 C U
5 V(0v)
6 V