64
Gigaset S820-S820A / LUG - UK + IE / A31008-M2404-L101-1-7619 / appendix.fm / 11/26/12
Te
mplat
e
CE
S 13
1x195
1co
l, V
e
rs
ion 1,
1
2
.03.
20
12
Service (Customer Care)
Questions and answers
If you have any queries about the use of your telephone, suggested solutions are available on
the Internet at www.gigaset.com/service
¤
FAQ
¤
First steps for troubleshooting.
The table below also lists steps for troubleshooting.
Registration or connection problems with a Bluetooth headset.
¥
Reset the Bluetooth headset (see the user guide for your headset).
¥
Delete registration data from the handset when de-registering the device (
¥
Repeat the registration process (
There is nothing on the display and the display does not react when you touch it.
1. The handset is not activated.
¥
Press and
hold
a
.
2. The battery is flat.
¥
Charge or replace the battery (
3. The keypad and display lock is activated.
¥
Press the hash key
#
and hold
.
"
Base connection lost - Searching for base ...
"
flashes on the display
.
1. The handset is outside the range of the base.
¥
Move the handset closer to the base.
2. The base is not activated.
¥
Check the base power adapter (
3. The base’s range is reduced because Eco Mode is activated.
¥
Deactivate ECO DECT (
page 32) or reduce the distance between the handset and the base.
"
Handset not registered to any base
"
flashes on the display.
The handset has not yet been registered or was de-registered due to the registration of an additional handset
(more than six DECT registrations).
¥
Register the handset again (
The handset does not ring.
1. The ringtone is deactivated.
¥
Activate the ringtone (
2. Call divert is set.
¥
Deactivate call divert (
3. The phone does not ring if the caller has withheld his number.
¥
Activate the ringtone for unknown calls (
4. Phone does not ring during a specific period or for certain unknown numbers.
¥
Check time control for external calls (
You cannot hear a ringer/dialling tone from the fixed line.
The phone cord supplied has not been used or has been replaced by a new cord with the wrong pin connec-
tions.
¥
Please always use the phone cord supplied or ensure that the pin connections are correct when purchas-
ing from a retailer (
The connection always terminates after approx. 30 seconds.
Repeater activated/deactivated (
¥
Switch the handset off and back on again (
Error tone sounds after system PIN prompt.
You have entered the wrong system PIN.
¥
Repeat the process, if necessary reset the system PIN to 0000 (
Содержание S820
Страница 2: ...Gigaset S820 S820A LUG UK IE A31008 M2404 L101 1 7619 Cover_front fm 11 26 12 ...
Страница 85: ......