Gigaset S820, Руководство пользователя

Страница: 34 / 85

32
Gigaset S820-S820A / LUG - UK + IE / A31008-M2404-L101-1-7619 / settings.fm / 11/26/12
Te
mplat
e
CE
S 13
1x195
1co
l, V
e
rs
ion 1,
1
2
.03.
20
12
ECO DECT
ECO DECT
ECO DECT indicates low energy consumption and reduced transmission power.
Reduced transmission power (radiation)
In normal operation mode (factory setting):
On delivery, the device is set to maximum range. This guarantees optimised wireless manage-
ment. The handset does not emit a signal in idle status (no radiation). Only the base ensures con-
tact with the handset is maintained through low-strength wireless signals. During a call the
strength of the wireless signal is adapted automatically to the distance between the handset
and base. The smaller the distance between the handset and base, the lower the transmission
power.
You can further reduce the transmission power as follows:
1) Reducing the range to decrease transmission power by up to 80%
Many apartments, business premises, offices, etc., do not need the maximum range. If you deac-
tivate the
Maximum Range setting, transmission power during a call is reduced to 80% at half
the range.
Menu key
v
¤
Settings menu page
¤
Ê
System
¤
ECO DECT
¤
Maximum Range on/off
Display icon for reduced range
¢
page 58.
2) Deactivating the DECT wireless module in idle status (Eco mode+)
You can deactivate the wireless signal output from the base completely in idle status via the No
Radiation setting.
Menu key
v
¤
Settings menu page
¤
Ê
System
¤
ECO DECT
¤
No Radiation on/off
When the wireless module is deactivated the idle display shows the icon instead of the sig-
nal strength icon.
Please note
u
To benefit from Eco mode+ , all registered handsets must support this function.
u
The wireless connection is established automatically for incoming or outgoing calls only.
This causes a connection delay of approx. 2 seconds.
u
Handsets need to "listen in" to the base, i.e., scan the surrounding area, on a regular basis
to enable them to establish a connection to the base quickly in the event of an incoming
call. This increases power consumption and therefore reduces the handset’s standby
time and talktime.
u
When Eco mode+ is activated (no radiation) the handset does not display a range indi-
cator/range warning. You can check availability by calling a line: Press and hold the talk
key
c
. You hear the dial tone.
u
If a handset registered on a base in Eco mode+ does not support this feature, Eco mode+
is automatically deactivated (range indicator is activated on handsets and the switch
turns to Off ). As soon as the incompatible handset is de-registered again, Eco mode+ is
reactivated automatically.
¹
Ð