Gigaset S670 Скачать руководство пользователя страница 12

Страница: 12 / 68

First steps

Gigaset S670 / IM-NORD EN / A31008-M1904-R201-1-SM19 / starting.fm / 4.6.07

ion 4,

.09.

2005

Headset socket

You can connect various headset types

(with 2.5 mm jack connector), including:

HAMA Plantronics M40, MX100 and

MX150.
You can access a list of headsets that

have been tested for compatibility on

the Internet at

www.plantronics.com/productfinder.

Initial charging and discharging of

batteries

If the handset is activated, the flashing

battery icon

in the top right of the dis-

play indicates that the batteries are being

charged.
During handset operation, the battery

icon indicates the charge status of the bat-

teries (page 1). The correct charge level

can only be displayed if the batteries are

first fully charged

and

discharged.

To do this, leave the handset in the

base station or charging cradle

contin-

uously

for

seven

hours. Your handset

need not be turned on for it to charge.

Afterwards, remove the handset from

the base station and do not put it back

again until the batteries are fully dis-

charged.

Please note:

Always repeat the charging and dis-

charging procedure if you remove the

batteries from the handset and reinsert

them.

The batteries may warm up during

charging. This is not dangerous.

After a while the charge capacity of the

batteries will decrease for technical rea-

sons.

Setting the date and time

The date and time must be set in order to,

for example, have the correct time for

incoming calls and be able to use the

alarm clock and calendar.

If you have not yet set the date and

time, press the display key

§Time§

to open

the input field.

To change the time, open the input field

with:

Date/Time

Change multiple line input:

Date:

Enter the day, month and year in 8-digit

format.

Time:

Enter hours and minutes as 4 digits,

e.g.

Q M

for 07:15 a.m.

§Save§

Press the display key

Display in idle status

Once the phone is registered and the time

set, the idle display is as shown here

(example)

Your phone is now ready for use.

If you have any queries about using your

phone, please read the tips on trouble-

shooting ("Questions and Answers",

page 51) or contact our customer service

department (Customer Care, page 53).

Please note:

After the first battery charge

and

discharge

you may replace your handset in its base sta-

tion after every call.

INT 1

15.11.07

07:15

SMS

Содержание S670





































































Результаты поиска

Содержание S670

Отзывы:

Похожие инструкции для S670

Бренды по названию

Популярные бренды

Gigaset S670, Руководство пользователя

Результаты поиска

Содержание S670

Отзывы:

Похожие инструкции для S670

Бренды по названию

Популярные бренды