52
Appendix
Gigaset S670 / IM-NORD EN / A31008-M1904-R201-1-SM19 / appendix.fm / 4.6.07
Ve
rs
ion 4,
16
.09.
2005
You cannot hear a ringer/dialling tone from
the fixed network.
The phone cord supplied has not been used or
has been replaced by a new cord with the
wrong jack connections.
¥
Please always use the phone cord supplied
or ensure that the jack connections are cor-
rect when purchasing from a retailer
Error tone sounds after system PIN prompt.
You have entered the wrong system PIN.
¥
Reset the system PIN to 0000 (page 47).
Forgetting the system PIN.
¥
Reset the system PIN to 0000 (page 47).
Call charges are not displayed.
1. Your network provider does not support this
feature.
2. There are no metering pulses.
¥
Ask your network provider to transmit
the metering pulses.
The other party cannot hear you.
You have pressed the
u
(INT) key. The hand-
set is "muted".
¥
Activate the microphone again (page 16).
The number of the caller is not displayed
despite CLIP.
Calling Line Identification is not enabled.
¥
The caller
should ask the network provider
to release Calling Line Identification (CLI).
You hear an error tone when keying an input
(a descending tone sequence).
Action has failed/invalid input.
¥
Repeat the operation.
Watch the display and refer to the user
guide if necessary.
You cannot listen to messages on the net-
work mailbox.
Your phone system is set for pulse dialling.
¥
Set your phone system to touch tone dial-
ling.