Gigaset E560HX / LHSG IE-UK en / A31008-M2766-L101-1-7619 / applications_HX.fm / 9/27/16
Te
mplat
e
G
o
, V
e
rs
ion 1
, 01.
07
.2
014
/ M
odu
leV
e
rs
ion 1
.0
Baby monitor
Availability and operation of the functions
may differ on your telephone.
31
Switching off/repeating the alarm after an interval (snooze mode)
Prerequisite:
An alarm call sounds.
¤
Deactivate until the next alarm call:
Press
Off
.
Or:
¤
Snooze mode:
Press
Snooze
or any key. The wake-up call is deactivated and then repeated after 5 minutes.
Or:
Press nothing. The alarm call is deactivated after 60 seconds and then repeated after
5 minutes. After the fourth repetition, the alarm call is deactivated for 24 hours.
Baby monitor
When the baby monitor is switched on, the stored (internal or external) destination number is
called as soon as a defined noise level is exceeded in the vicinity of the handset.
In baby monitor mode, incoming calls are only signalled on the display (
without ringtone
). The
display backlight is reduced to 50%. Advisory tones are deactivated.
If you accept an incoming call, the baby monitor mode is suspended for the duration of the call,
but the function
remains
activated. The baby monitor mode is not deactivated by switching the
handset off and on again.
Activating and setting the baby monitor
¤
Menu
Baby Monitor
OK OK
(
= baby monitor activated)
If a destination number has already been entered, the baby
monitor is activated with this. The display shows
Baby Monitor:
and the specified destination number
If a destination number has not yet been entered:
Activate an
External call
:
OK
Enter the number
OK
or activate an internal call:
¤
Internal call
OK
. . . the baby monitor is triggered on all registered handsets
The handset should be positioned 1 to 2 metres away from the baby. The microphone
must point towards the baby.
Activating the function reduces the operating time of your handset. For that reason,
place the handset in the charging cradle if necessary.
The baby monitor is activated 20 seconds after switching on.
The answer machine for the destination number must be switched off.
After switching on:
¤
Test sensitivity.
¤
Test the connection, if the alarm is being forwarded to an external number.
Baby Monitor:
01230000
Off
