123
Configuring the system settings
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / settings.fm / 06.09.11
V
e
rsion 4, 16.0
9
.2005
§Change§
Press the display key to activate/
deactivate the DECT interface
(
³
= activated).
If there are no handsets registered to the
base, the base's DECT interface is automati-
cally deactivated.
If you switch the base to registration mode
(
¢
page 97)
to reregister handsets, the
DECT interface is automatically reactivated.
KR-Change-Begin: Please change condition
of the following section
Activating/deactivating the
FAX port
You can connect a fax machine or a phone to
the FAX port on the telephone. To register
the fax machine/the phone to the base, you
must activate the FAX port, i.e. set the port
to
Telephony / Fax
mode.
The FAX port is deactivated by default.
When you activate the FAX port, it is
regarded as registered. The internal number
8 is assigned to it/the connected device.
INT
8
is displayed in the list of internal parties
(even if there is no device connected).
v
¢
Ï
Settings
¢
System
¢
FAX Port
Mode:
Select
Telephony / Fax
to activate the
FAX port. Select
Off
to deactivate the FAX
port
For instructions on connecting a device to
the FAX port, see
page 107
.
Restoring the base to the
default settings
The individual settings are reset.
When the settings are restored:
u
Handsets are still registered
u
The system PIN is not reset.
The following settings in particular are reset
to the default settings (you can make the
settings marked "*)" via the Web configu-
rato:r):
u
The entered VoIP connections (are
deleted)
u
The assignment of send and receive con-
nections
u
Settings for the ringer melodies and vol-
ume levels
u
Settings for wake-up calls and appoint-
ments
u
Audio settings for VoIP connections *)
u
DTMF settings *)
u
Own area code
u
Settings for the local network
u
The names of the handsets
u
Eco mode is deactivated
u
PABX connection settings
u
Answering machine settings and per-
sonal announcements are deleted
u
Function and display key assignments as
well as key
u
Settings for network services: call divert,
call transfer (ECT)
The following lists are deleted:
u
Call lists
u
Answering machine lists
v
¢
Ï
¢
System
¢
Reset
~
Enter the system PIN and
press
§OK§
.
§Yes§
Press the display key.
After resetting, the base is restarted.
The installation wizard is launched
(
¢
page 19)
.
