107
Connecting/using other devices
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / HS_and_other_Devices.fm / 06.09.11
V
e
rsion 4, 16.0
9
.2005
Connecting a fax machine or
a phone
You can connect an ITU-T Group 3 fax
machine or a phone to the base via the FAX
port.
1. Insert one end of the fax connection ca-
ble from the rear into the recess in the
housing.
2. Plug the jack into the fax port on the base
(labelled:
FAX
).
3. Connect the fax connection cable to the
port on the fax machine or the phone.
You do not explicitly have to register the
device to the base. It is automatically "regis-
tered", once you activate the FAX port on the
base (
¢
page 123
, default setting is "off").
Once the FAX port is switched on, the device
is added to the list of internal parties with
the internal name
INT 8
.
The first number from the configuration is
assigned as a send connection. You can
change the assignment
(
¢
page 120)
.
1
3
2
Please note
When connecting a multifunction device
(fax/phone) or a phone to the FAX port,
you must observe the following:
u
There is no ringing tone when you
pick up.
u
CLIP
(
¢
page 47)
is not supported
for incoming calls.
u
If the answering machine takes a call
on the device's receive connection, it
continues to ring.
u
If the device's receive connection is
assigned neither to the base nor a
handset, calls are not transferred to
the call lists.
u
To call an internal subscriber or to
make an internal consultation call
during an external call enter an „F“ in
front of the corresponding internal
number.
u
Other internal functions such as
"internal transfer" are not supported.
Please note
If a number is only assigned to the fax
machine/phone as a receive connection,
then calls to this number will not be
entered in the call lists (it is not possible
to delete the entries from the base or a
handset).
