65
Making cost-effective calls
Gigaset S44 / englisch / A31008-M368-B103-1-7619 / charges.fm / 21.2.05
Call charge display
You can display the charges if you have requested this from your network provider.
You can check the cumulative units/total charges and the charges of the last call made
(depending on setting, see page 67). The total charges include the charges accrued by
this handset. If you do not receive any rate information from your network provider,
the call duration is displayed.
Setting up charge calculation
Ask your network provider if the call charges are transferred as a rate unit or as an
amount. Set the account type
Units cent.off.
or
Costs cent.off.
accordingly.
If you have selected
Costs cent.off.
, but only units are transmitted by the network pro-
vider, after the call the setting will automatically switch to
Units cent.off.
.
By default,
Units cent.off.
is pre-set
.
Setting the account type
The
No rate
pre-set will display units.
v
¢
í
¢
Call Charges
¢
Type of calcul.
either ...
Set Costs cent.off.:
s
Costs cent.off.
Select and confirm (
‰
= activated).
or ...
Set Units cent.off.:
s
Units cent.off.
Select and confirm (
‰
= activated).
OK
OK
i
If you have also entered a factor (see next section "Entering the price per
unit"), the call charges are multiplied by this figure. You can also use a fac-
tor if you want to charge higher call charges (e. g. charges displayed to be
increased by a factor of 2); otherwise deactivate the factor function.