7
Setting up the handset for use
Gigaset S44 / englisch / A31008-M368-B103-1-7619 / starting.fm / 21.2.05
Setting up the handset for use
Removing the protective film
Inserting the batteries
Opening the battery cover
Press below the upper curve on the battery cover and slide down.
The display is protected by a plastic film.
Please remove the protective film!
!
Use only the rechargeable batteries recommended by Siemens on
page 136, i.e. on no account may a conventional (non-rechargeable) bat-
tery or other battery type be used, otherwise serious damage to health
and property cannot be ruled out, e.g. the outer casing of the batteries
could be destroyed or the batteries could explode. The phone could also
malfunction or be damaged as a result of using batteries that are not of
the recommended type.
Insert batteries with
correct polarity
(see schematic diagram).
The polarity is indicated in/on the battery compartment.
Closing the battery cover
Position the cover pointing slightly downwards and
push it up until it clicks into position.