63
Operation via the handset
Gigaset C810/810 A / CHN en/ A31008-M2327-Y101-1-7619 / AM_BS+HS.fm / 15.09.2011
V
e
rsion 4, 16.0
9
.2005
Deleting the announcement
Ì
¢
Announcements
¢
Del. Announcement
Once you have deleted your announcement,
the relevant pre-recorded announcement
will be used again.
Setting the answering
machine mode
You can choose between
Answer & Record
,
Announce. Only
and
Ans. Mode Time
. By
using the
Ans. Mode Time
setting you can
activate the answer and record mode for a
set period, outside this period the caller will
hear the advisory message.
Ì
¢
Announcements
¢
Set Answer Mode
¤
Select the answering machine mode and
press
§§Ok§§
.
Answer & Record
The caller hears the announcement and
can then leave a message.
Announce. Only
The caller hears the announcement but
cannot leave a message.
Ans. Mode Time
The caller can leave a message in the
defined time period.
If the
Ans. Mode Time
mode is selected:
From:
Enter hours/minutes for the start of the
period in 4-digit format.
(The time
must
be set on the phone
beforehand.)
Until:
Enter hours/minutes for the end of the
period in 4-digit format.
Example
: If
Ans. Mode Time
is set from 8:00
until 18:00, the answering machine will
answer and record from 8:00 to 18:00, and
answer only but not record from 18:01 to
7:59 next morning.
Activation
r
Use the control key to activate
(
On
) or deactivate (
Off
) the time
settings.
Setting the recording
parameters
The answering machine has already been
preset at the factory. Individual settings can
be adjusted using the handset.
Setting the message length
You can set the maximum length of the
recording time:
Ì
¢
Message Length
r
Use the control key to select the
maximum length and and press
§§Ok§§
. Possible values:
1 min
,
2 min
,
3 min
or
Maxi-
mum
.
Setting the ring delay
You can set the number of rings the tele-
phone will wait before the answering
machine answers a call.
Ì
¢
Ring Delay
r
Use the control key to select the
number of rings and press
§§Ok§§
.
Possible values:
1 ringer
,
3 ringers
,
6 ringers
or
Auto
.