58
Hiding/showing answering machines
Gigaset 4170/4175isdn, A31008-G4170-B100-2-7619
Anrufbeantwort-
21.2.02
Step
by
Step
Hiding/showing answering machines
If you want to operate only one answering machine for your line (e.g AM91),
you can hide the other AMs in all displays and menus with this procedure. The
procedure deactivates any active AM. The AM returns to its previous condition
when it is shown again.
If there are still any messages on an AM which you want to hide, you will be
informed of this during the procedure.
Press
G
for selection menus.
Select using [
Á
] and [OK]:
Base Settings
→
Settings
→
Setup user
→
Setup de-
vice
. The list of internal numbers will be displayed.
Select internal no. of the desired AM (e.g. AM93) using [
Á
] and [
W
].
Select and confirm using [
Á
] and [OK]:
Hide AM?
.
or
Select and confirm using [
Á
] and [OK]:
Show AM?
.
Activating an announcement
You can activate announcement 1 or 2, or the information announcement. If
available, the concluding announcement is automatically activated in connec-
tion with announcement 1 or 2.
If you have not recorded an announcement, the factory default announcement
is used.
Select using
G
and [OK]
: Voice mail
→
(desired AM)
→
Announcements.
Select using [
Á
] and [
W
]:
(required announcement)
.
Select using [
Á
] and [OK]:
Select
.
Recording/modifying announcements
A total of 4 announcements can be recorded:
●
Announcement 1
●
Announcement 2
●
Announcem. only
●
Concl.announcem
Select using
G
and [OK]
: Voice mail
→
(desired AM)
→
Announcements.
Select using [
Á
] and [
W
]:
(required announcement)
.
Select using [
Á
] and [OK]:
Record
.
Press [START]: start recording.
Record announcement.
Press [STOP]: end recording.
The announcement is played back so that you can check it.
Recording is automatically aborted if:
●
you pause for more than 8 seconds while recording the announcement
●
the memory is full
1.
2.
3.
4.
4.
1.
2.
3.
1.
2.
3.
4.
5.
6.
