Gigamon GigaVUE H TA100-CXP, Руководство по установке оборудования

Страница: 74 / 115

Technique Description
partially-typed word to see a list of all
possible commands using the word
entered so far.
For example, if you typed i? in Configure mode, the CLI
would return the following possible commands based on
what you’ve entered so far:
image interface ip
• Command Help – Type a command
followed by a question mark to see all
possible arguments for the command
as entered. If the system returns <cr>,
that means the command can be
entered as-is.
For example, if you entered gigastream ?, you would see
alias. You can build your way through the entire command
tree by entering ? after each new argument. For example,
after entering gigastream alias myalias ?, you would see
the next valid argument – port-list.
N
OTE
: Typing ? accesses the help system immediately –
you do not need to press <Enter>.
Partial Command
Entry For all GigaVUE TA Series commands and arguments,
you only need to enter enough characters to
distinguish the command from all other available
commands. So, for example, you do not have to enter
the full command username – there is only one
command starting with the letter u, so you only have to
enter u.
Command
Completion If you have partially typed a command, you can press
Tab and the CLI will attempt to complete the command
for you based on what’s been entered so far.
It is helpful to use the Command Completion feature
together with partial command entry – you can press
Tab while entering a command to see a list of all
available commands matching what you’ve entered so
far. For example, you can press p<Tab> and the system
will return:
pass-all ping port port-pair
Based on this information, you know that you only
need to enter the letter pa to uniquely identify what
you’ve entered as pass-all.
Contents
74
GigaVUE TA Series Hardware Installation Guide