Gigamon GigaVUE H TA100-CXP Скачать руководство пользователя | Manualshive

Страница: 50 / 115

background image

• The q1..q4 40Gb ports include a single link LED on the GigaVUE TA Series-TA10

faceplate. When a physical 40Gb interface is used as four 10Gb ports, the 40Gb port
LED indicates the status of the first of the four 10Gb ports on the patch panel (for
example x49 in the x49..x52 group, x53 in the x53..x56 group, and so on). The other
three ports in the group do not affect the link LED for the 40Gb port on the
GigaVUE TA Series-TA10 faceplate.

Once the card mode has been configured, refer to

Breakout Panels

.

Configure the Port Mode

The port breakout modes are as follows:

• 4x10G—Specifies the 4x10G port breakout mode. This mode applies to GigaVUE TA

Series-TA40, GigaVUE TA Series-TA100, GigaVUE TA Series-TA200 nodes and
GigaVUE-TA25 and to QSFP28 ports on GigaVUE TA Series-TA00-CXP nodes. This
mode provides a 4 x 10Gb breakout option for 40Gb ports.

• 4x25G—Specifies the 4x25G port breakout mode. This mode applies to GigaVUE TA

Series-TA200 and GigaVUE-TA25 nodes. This mode provides a 4 x 25Gb breakout
option for 100Gb ports.

• none—Specifies no port breakout mode. This is the default mode for GigaVUE TA

Series nodes.

Any of the 100Gb ports on the GigaVUE-TA100 (1/1/c1 to 1/1/c32), the first 32 ports on
the GigaVUE-TA200 (1/1/c1 to 1/1/c32), the eight QSFP28 ports (1/1/c21 to 1/1/c28) on
the GigaVUE-TA100-CXP or the eight ports on GigaVUE-TA25 ( 1/1/c1..1/1/c8) can
operate at 40Gb with QSFP+ SR transceivers. A 40Gb port can be broken out into four
10Gb ports, called subports. In GigaVUE-TA25 only the ports c1 and c5 support 4 x10G
breakout mode.

The subports will all have the same speed (10Gb). Subports will have x1 to x4 appended to
their port ID, for example, when port 1/1/c2 on GigaVUE-TA100 is configured to 4x10G
mode, the subports will be: 1/1/c2x1, 1/1/c2x2, 1/1/c2x3, and

1/1/c2x4. When port 1/1/c21 on GigaVUE-TA100-CXP is configured to 4x10G mode, the
subports will be: 1/1/c21x1, 1/1/c21x2, 1/1/c21x3, and 1/1/c21x4.

In 4x10G mode, the subports can function as network, tool, or hybrid ports, as well as
GigaStream port members. Subports on GigaVUE-TA100 and GigaVUE-TA200 can also
function as stack ports. In addition, the first 12 and the last 12 ports in GigaVUE-TA40 can
also function as stack ports.

• The maximum number of 10Gb subports on a GigaVUE-TA100 is 128 (32 x 4).

• The maximum number of 10Gb subports on a GigaVUE-TA100-CXP is 32 (8 x 4).

Contents

50

GigaVUE TA Series Hardware Installation Guide

«
...
48
49
50
51
52
...
»

Содержание GigaVUE H TA100-CXP




















































































































Отзывы:

Нет отзывов

Похожие инструкции для GigaVUE H TA100-CXP

Бренд: IBM Страницы: 248

Бренд: Abocom Страницы: 11

Бренд: Abocom Страницы: 19

Ray 3 Plus Client

Бренд: Sun Microsystems Страницы: 6

Adapter Bracket

Бренд: Paradyne Страницы: 1

Бренд: SeaLevel Страницы: 17

Linear SCP-LT8362-S-EVALZ

Бренд: Analog Devices Страницы: 8

USB-BRIDGEV2-EVAL

Бренд: IDT Страницы: 11

Marconi OMS 1200

Бренд: Ericsson Страницы: 136

Бренд: Justec Страницы: 61

Бренд: IEI Technology Страницы: 3

Бренд: Eneo Страницы: 68

18x18 Card Cage

Бренд: WolfPack Страницы: 31

2000 IDU Series

Бренд: EMS Страницы: 52

E5345 - Xeon 2.33 GHz 8M L2 Cache 1333MHz FSB LGA771 Active Quad-Core Processor

Бренд: Intel Страницы: 112

Бренд: Zoom Страницы: 31

Бренд: TRENDnet Страницы: 10

Imagestore Intuition+

Бренд: Miranda Страницы: 60

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды