Gigamon GigaVUE H Series Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 55

background image

Command

Description

ping6

Send ICMPv6 echo requests to a specified host.

policy

Configures an active visibility policy.

port

Configure port type, parameters, and filters.

port-group

Create a group of ports.

port-pair

Configure a port-pair on a pair of network ports within the same node. A port-pair is a
bidirectional connection in which traffic arriving on one port in the pair is transmitted out the
other (and vice-versa) as a passthrough TAP.

radius-server

Configure RADIUS server settings for authentication.

reload(reboot)

Reboot or shut down the node.

reset

Reset specified portions of the system configuration to their factory states.

serial

Set options for the serial console port.

sfp

Reserved for future use.

show

Display configuration and status information for a wide variety of settings and entities.

sleep

Sleep for a specified number of seconds.

snmp-server

Configure SNMP settings, including the local SNMP server, notification events, and notification
destinations.

spine-link

Configures spine links in a cluster with a leaf and spine architecture.

ssh

Enable and disable SSH access, as well as manage settings.

stack-link

Configure a stack-link between two nodes in a cluster. Stack-links are used to carry data traffic
between nodes in a cluster.

system

Change system settings.

system-health

Configures system health behaviors.

tacacs-server

Configure server settings for authentication.

tcpdump

Display packets from any eth

x

port in the node on a network.

terminal

Set terminal parameters, including width and length.

tool-mirror

Configures a tool-mirror connection between two tool ports. A tool-mirror connection sends all
packets arriving on one tool port to a second tool port on the same node.

traceroute

Trace the route packets take to a destination.

tunnel

Reserved for future use.

uboot

Installs new uboot software.

username

Manage user accounts.

web

Configure the Web server used for GigaVUE-FM GUI support on the node.

write

Save the running configuration to persistent storage.

Completing the Initial Setup

At this point, you have logged in to the command-line interface using the

admin

account, configured the

Mgmt

port’s network properties for SSH access, and have

explored the command-line interface.
There are a few more steps you should perform to complete the initial configuration
before you set up network ports, tool ports, and aggregate traffic. These tasks include:

Contents

32

GigaVUE-TA25E Hardware Installation Guide

«
...
30
31
32
33
34
...
»

Содержание GigaVUE H Series
























































Отзывы:

Нет отзывов

Похожие инструкции для GigaVUE H Series

Wireless Router

Бренд: Watchguard Страницы: 11

Бренд: D-Link Страницы: 32

Бренд: D-Link Страницы: 28

Бренд: D-Link Страницы: 48

Бренд: D-Link Страницы: 83

Бренд: D-Link Страницы: 155

Device Server UDS 10

Бренд: Lantronix Страницы: 8

Бренд: D-Link Страницы: 213

Бренд: DCE Страницы: 5

Бренд: Paradyne Страницы: 1

ThunderLAN TNETE100A

Бренд: Texas Instruments Страницы: 179

HomePlug AV Ethernet Bridge PLE0200

Бренд: Abocom Страницы: 2

IPAM-1600s Series

Бренд: C-Com Страницы: 148

Hotwire 8775 MSDSL

Бренд: Paradyne Страницы: 10

Бренд: AXIOMTEK Страницы: 58

Бренд: ADIC Страницы: 140

Бренд: Acromag Страницы: 23

Бренд: Top Страницы: 21

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды