Gigamon GigaVUE H Series Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 55

Gigamon GigaVUE H Series Скачать руководство пользователя страница 17

■

GREEN indicates the port has a valid link at 100G.

■

BLUE indicates the port has a valid link at 40G.

■

YELLOW indicates the port has a valid link at 4x 25G.

■

PURPLE indicates the port has a valid link at 4x 10G.

■

Off indicates the link is operationally down.

The SFP28 Port status are as follows:

■

GREEN indicates the port has a valid link at 25G.

■

YELLOW indicates the port has a valid link at 10G.

■

OFF indicates the link is operationally down.

PSU LEDs

The individual power LEDs on the rear of the chassis are as follows:

■

GREEN indicates the PSU is operating normally and is receiving good AC input.

■

OFF indicates the PSU is not operational and is not receiving any AC input.

GigaVUE-TA25E Rules and Notes

Keep in mind the following rules and notes when using the GigaVUE-TA25E:

GigaVUE-TA25E Rules and Notes

Transceivers

All Gigamon labeled 1Gb, 10Gb, 25Gb, 40Gb and 100Gb optics are supported.
For details about the supported transceiver, cable type, and connectivity specifications,
refer to “

GigaVUE-OS Compatibility and Interoperability Matrix

Network, Tool,
Hybrid, Stack
Port.

The GigaVUE-TA25E ports can be used as network, tool, hybrid, circuit, stack-link. The
4x10Gb and 4x25Gb ports also support all port types.

Map Rules
and Port
Filters

The GigaVUE-TA25E supports 256 map rules per pseudo slot and 20 egress port filters per
pseudo slot, without advanced feature license. For details about the maximum map rule
with advanced feature license, refer to the "Maximum Map Rules" table in the GigaVUE
Fabric Management Guide.

Inline Bypass
Feature

GigaVUE-TA25E does not support Inline Bypass feature.

PTP and Time
Stamping
Feature

GigaVUE-TA200E supports PTP and Time stamping feature.

Port Licensing Port Licensing is not required to enable the ports from x25 ......x48.

Cluster
Licensing

Connecting a GigaVUE-TA25E to a cluster requires the Advanced Features License.

Contents

17

GigaVUE-TA25E Hardware Installation Guide

«
...
15
16
17
18
19
...
»

Содержание GigaVUE H Series
























































Отзывы:

Нет отзывов