GIGAMEDIA
User’s Guide
_V2.0.7
Page 6 of 35
auto-negotiate connected, and the green indicators will flash when there are data
communications through the ports.
1.3 Rear Panel
Rear Panel
Power Socket: Three-core power socket is adopted, please connect female head
of power cord to the socket, and connect the AC power supply with male head.
Chapter 2 Preparations before Instruction
2.1 Precautions
Please read the following precautions carefully before operation, to avoid damaging the
device or causing body injuries.
1). Please remove the power s
ocket before cleaning the switch. Don’ wipe the switch with wet
cloth or wash the switch with liquid.
2). Don’t stock the device in damp environment or near water, to avoid water or moisture
penetrating into the inner device.
3). Don’t put the device on a unstable box or desk, the device will get damaged from falling.
4). Please keep good ventilation indoor, and make sure the heat dissipation function of switch
works well.
5). The switch only works normally in suitable voltage. Please check the working voltage first.
6). Please don’t open the switch enclosure randomly, especially when the switch is powered
on, there is risk of electric shock.
7). Please wear anti-static wrist strap when change the interface board, to avoid the static
electricity damage the board.
2.2 Check Installation Environment
The switch is for indoor use only, please pay attention to the following problems when install
the switch in a cabinet or put the device directly on the desktop.
1)
The air vents of switch must have enough space to dissipate the heat inside enclosure.
2)
A good heat dissipation system in the cabinet or on the desktop.
3)
The cabinet or desktop strong enough to support the weight of switch and installation
accessories.
4)
Safe ground connection for the cabinet or desktop.
2.3 Installation Tools
1) Flathead screw driver
