GIGAMEDIA
User’s Guide
_V2.0.7
Page 18 of 35
3.4 Time Settings
3.5 Port Setting
Port Setting
Port Status: The user can enable or disable a port in this page. Clic
k “Enable” to open the port,
click “Disable” to close the port, the default setting is “Enable”.
Port Mode: 6 modes can be configured: Auto-negotiation, 10 Half, 10 Full, 100 Half, 100 Full
and1000 Full. Default mode is Auto-negotiation, can be changed in pull-down list.
Flow Control: This function is defaulted closed, open it when needed.
Loop Detection: The function is defaulted closed, open it when needed. A port will be blocked
to cut the loop when loop is detected.( Notice: the port link indicator in front panel will be still
on when the port is blocked, for the physic connection is existed; while the link indicator on
the top of web management pages will be off.)
