GIGAMEDIA
User’s Guide
_V2.0.7
Page 20 of 35
Switches support 8 aggregation groups, each group contains maximum 8 ports. The
members in the same aggregation group should have same configuration for port
forwarding rate mode and VLAN distribution.
If LACP function applied for some ports, then static aggregation can’t be configured.
Notice: Sta
tic aggregation can’t be configured when LACP function enabled.
4.2.2 LACP Setting
LACP Setting
When the LACP protocol is on, the aggregated devices interactively gather information
through LACP. According to the parameters and status of each device, automatically receive
and dispatch Data of matchable link aggregation. When the Aggregation is formed, switches
keep in an aggregation link status, switches automatically adjusts link aggregation or
dissolute when configuration changes.
If the port is configured as static aggregation, the dynamic LACP will be not available.
Notice: Static aggregation LACP function can
’t be used together.
4.3 VLAN Management
4.3.1 VLAN Setting
VLAN Setting
VLAN can be created or deleted in above page. Users can create a new VLAN and give
