GL-VP-150
User Manual
Copyright © 2009-2011 GigaLink
Page 35 of 37
Min-SE
Defines the minimum session expiration (in seconds). Default is
90 seconds
.
Caller
Request
Timer
If set to “Yes”, the phone will use session timer when it makes
outbound calls if remote party supports session timer.
Callee Request
Timer
If s
electing “Yes”, the phone will use session timer when it
receives inbound calls with session timer request.
Force Timer
If set to “Yes”, the phone will use session timer even if the
remote party does not support this feature. If set to “No”, the
session timer is enabled only when the remote party supports
this feature. To turn off Session Timer, select “No” for Caller
Request Timer, Callee Request Timer, and Force Timer.
UAC
Specify
Refresher
As a Caller, select UAC to use the phone as the refresher, or
UAS to use the Callee or proxy server as the refresher.
UAS
Specify
Refresher
As a Callee, select UAC to use caller or proxy server as the
refresher, or UAS to use the phone as the refresher.
Force Invite
Session Timer can be refreshed using INVITE method or
UPDATE method. Select “Yes” to use INVITE method to refresh
the session timer.
Special Feature
Default is Standard. Choose the selection to meet some special
requirements from Soft Switch vendors like Lucent FS5000
Simple Endpoint, CBCOM, etc.
8.2.5.
Saving the Configuration Changes
Once a change is made, users should click on the “SaveSet” button in the Configuration
page, as follow:
The GL-VP-150 will then display the following screen to confirm that the changes have
been saved. Please allow 5 to 10 seconds before rebooting the device.
