Gigalink GL-VP-150 Скачать руководство пользователя

Страница: 29 / 37

GL-VP-150

User Manual

Page 29 of 37

the SIP server to keep the “hole” on the NAT open.

SIP User ID

SIP service subscriber‟s User ID

Authenticate ID

SIP service subscriber‟s Authenticate ID. Can be identical to or
different from SIP User ID

Authenticate

Password

SIP service subscriber‟s account password

Name

SIP service subscriber‟s name which will be used for Caller ID
display

Use DNS SRV

Default is No. If set to Yes the client will use DNS SRV for

server lookup

User ID is Phone

Number

If the GL-VP-150 has an assigned PSTN telephone number, this
field should be set to “Yes”. Otherwise, set it to “No”. If “Yes” is
set, a “user=phone” parameter will be attached to the “From”
header in SIP request

SIP Registration

This parameter controls whether the GL-VP-150 needs to send

Unregister

Reboot

Default is “No.” If set to “Yes”, then the SIP user will be
unregistered on reboot.

This parameter allows the user to specify the time frequency (in

minutes) the GL-VP-150 refreshes its registration with the

specified registrar. The default interval is 60 minutes (or 1 hour).

The maximum interval is 65535 minutes (about 45 days).

Outgoing call without

Registration

Default is

. If set to “Yes,” user can place outgoing calls even

when not registered (if allowed by ITSP) but is unable to receive

incoming calls.

Local SIP port

This parameter defines the local SIP port the GL-VP-150 will

listen and transmit. The default value for FXS port is 5060. The

default value for FXO port is 5062.

Local RTP port

This parameter defines the local RTP-RTCP port pair the

GL-VP-150 will listen and transmit. It is the base RTP port for

channel 0. When configured, channel 0 will use this port _value

for RTP and the por1 for its RTCP; channel 1 will use

por2 for RTP and por3 for its RTCP. The

default value for FXS port is 5004. The default value for FXO

port is 5008.

Use Random Port

This parameter, when set to Yes, will force random generation

of both the local SIP and RTP ports. This is usually necessary

when multiple GL-VP-150 are behind the same NAT.

Refer-To Use Target

Contact

Default is NO. If set to YES, then for Attended Transfer, the
“Refer-To” header uses the transferred target‟s Contact header

Содержание GL-VP-150





































Результаты поиска

Содержание GL-VP-150

Отзывы:

Похожие инструкции для GL-VP-150

Бренды по названию

Популярные бренды

Gigalink GL-VP-150, Руководство пользователя

Результаты поиска

Содержание GL-VP-150

Отзывы:

Похожие инструкции для GL-VP-150

Бренды по названию

Популярные бренды