Made in Germany
© Gigahertz Solutions GmbH
16
The audio analysis
8
of the modulated portion of the HF signal
helps to
identify the source of a given HF radiation signal
.
Sounds and signals are very difficult to describe in writing. The
best way to learn the signals is to approach known HF sources
very closely and listen to their specific signal patterns. Without
detailed knowledge, the
characteristic signal patterns
of the
following HF sources can be easily identified: 2.4 GHz telephones
(DECT phones, incl. base station and handset) as well as cellular
phones, the signal patterns of which can be divided into “a live
connected phone call“, “stand-by mode“ and, especially im-
portant for cellular phones, the “establishing of a connection“. The
typical signal patterns of a cellular phone base station can also be
identified this way. For comparison reasons you are well advised
to take measurements during high-traffic times, as well as some
times during the night, in order to familiarize yourself with the dif-
ferent noises.
”Marking“ of unpulsed signals:
Un-pulsed signals by their very nature are not audible in the audio
analysis and therefore easily missed. For that reason they are
marked by a uniform “rattling” tone, with its volume proportional
to its contents of the total signal. Within the frequency range cov-
ered only by the UBB antenna unpulsed signals are quite com-
mon.
On our home page you will find a link to some typical samples of
audio analyses as MP3-files as well as the marking signal. Fur-
thermore, the audio analysis can be significantly simplified by the
filters we offer.
For more in-depth analyses
Gigahertz Solutions offers:
Attenuator and amplifiers
for expanding the designed range of
the analysers up- and downwards for extra strong and extra
weak sources of pollution.
Frequency filters
for a more precise separation of different ra-
dio frequency service bands.
Instruments for HF up to 6 GHz / 10 GHz:
For analyses for yet
higher frequencies (up to abt. 6 GHz, including WLAN, WIMAX
and some directional radio sources and aviation radar), we offer
the HFW35C (2.4-6 GHz). A new broad band analyser for 2.4-10
GHz is under development (HFW59B).
Instruments for low frequencies
: Electrosmog is not limited to
the
R
adio
F
requency range! Also for the low frequency range
such as power (distribution and domestic installations) and rail-
ways including their higher harmonics we offer a broad range of
affordably priced instruments with high professional standards.
Please refer to our homepage for comprehensive coverage.
8
Turn the attenuator knob for the audio analysis fully to the left („-„) before be-
ginning, as it might become very loud, when switching while monitoring a high
intensity radiation.
Содержание HFE35C
Страница 2: ...Made in Germany Gigahertz Solutions GmbH ...
