19
6.3.3 IP base (TOS) priority recognition
Ports with TOS enabled will induce switch to inspect the specific field of IP
packet to control packets priority. Making a check mark in front of port id
indicates this port is TOS priority recognition enabled.
Default:
setting all port in
TOS priority recognition disabled
.
6.3.4 VLAN tagging base (TCI) priority recognition
Making a check mark in front of port id indicates this port is TCI priority enabled.
Default:
setting all port in
TCI priority recognition disabled
.
6.4 VLAN
Group
Setting
There is One (1) default group (G00) and Twenty-Three (23) user defined
groups (from G01 to G23). You can click
Change to VLAN group 0 to 11
or
Change to VLAN group 12 to 23
to switch the group page for setting.
6.4.1 VLAN Group Setting Pages(Port Base)
Organize your Virtual LAN (VLAN) groups in this page. In this version, you can
set at most 24 VLAN groups. Usually, group 0 is default group and not allowed
for user to use.
6.4.2 VLAN Group 1 to 23 (G01 to G23)
Grouping user with the same attribute provides flexible network managing.
Users in the same group can have a group name to name it, i.e. in the
Group
name
field. To config a VLAN group, you should need just to check all the ports
belonging to the same group and leave the others unchecked.
Default:
setting all ports in the same VLAN group
G00
. After you click
Apply
,
