3. Installation
(1) Hardware Installation
To insert the network adapter into your PC, follow the steps bellow:
1. Turn off the computer and remove its cover.
2. Insert the adapter into a PCI slot.
3. Secure this adapter to the rear of the computer chassis and put back the computer cover.
4. Connect the adapter to the network using twisted-pair cable.
(2) Driver Installation
Use the drivers supplied by the diskette included in this product. For detail description, please
refer to the diskette provides by this product.
4. Trouble-shooting
If you experience any problems with the adapter, first make sure the appropriate driver is
loaded, the proper cable is connected to the adapter port and the hub complies with the
adapter specification, such as 10Mbps 10Base-T or 100Mbps 100Base-TX, then check
the LED.
The adapter provides easy LEDs to indicate network status.
FCC COMPLIANCE STATEMENT
This equipment has been tested and found to comply with the limits of a Class B computing devices,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. If you suspect this product is causing interference, turn your
computer on and off while your radio or TV is showing interference. If the interference disappears then
when you turn the computer off and reappears then you turn the computer on, something in the computer is
causing interference. You can try to correct the interference by one or more of the following measures:
1. Reorient/Relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit difference from that to which the receiver is connected.
4. Ensure that all expansion slots (on the back or side of the computer) are covered. Also ensure that all
metal retaining brackets are tightly attached to the computer.
All brand and product names are the trademarks and/or registered trademarks of their respective
companies.
