Configuration
100Mbps Server to 10Mbps Hub
1. Plug one end of the Category 5 UTP Cable into any one
port of the 16/24-port Ethernet switching. And the other end of
this cable into the RJ-45 of Fast Ethernet Adapter in the server.
The cable length between these 2 connecting points should not
exceed 100meter.
2. Plug one end of the Category 3 UTP Cable into “Uplink”
port of the 16/24-port Ethernet switching, and the other end of
this cable into any port of the 10Mbps Ethernet Hub. The cable
length between these 2 connecting points should not exceed
100meter.
10Mbps Hub to 100Mbps Hub
1. Plug one end of the Category 5 UTP Cable into one port of
the 16/24-port Ethernet switching. And the other end of this
cable into any port of the 100Mbps Fast Ethernet Hub. The
cable length between these 2 connecting points should not
exceed 100 meter.
2. Plug one end of the Category 3 UTP Cable into one port of
the 16/24-port Ethernet Switching, and the other end of this
cable into any port of the 100Mbps Ethernet Hub. The cable
length between these 2 connecting points should not exceed 100
meters.
