SATA Hard Drive Configurations (Sil3112)
- 11 -
Figure 16
Figure 17
Step 3:
If Setup correctly recognizes the driver in the floppy disk, a controller menu similar to Figure 16 below
will appear. If you want to install Windows XP, use the ARROW keys to select
Silicon Image SiI 3x12
SATARaid Controller for Windows XP
* and press ENTER
.
Then it will begin to load the SATA driver
from the floppy disk.
If you have copied the SATA non-RAID driver, a screen similar to that below will appear. Use the
ARROW keys to select
Silicon Image SiI 3x12 SATALink Controller for Windows XP/Server 2003
*
(Figure 17) and press ENTER
.
Then it will begin to load the SATA driver from the floppy disk.
If a message appears saying one or some file(s) cannot be found, please check the floppy disk
or copy the correct SATA driver again from the motherboard driver CD.
"*"
Select the driver according to the operating system that you want to install.
