SATA Hard Drive Configurations (Sil3112)
- 10 -
Ác
Åé
¤¤
¤å
Figure 14
Figure 15
Step 2:
When a screen similar to that below appears (Figure 15), insert the floppy disk containing the SATA driver
and press S.
(5) Installing SATA controller driver during OS installation
Now that you have prepared a floppy disk with the SATA controller driver and configured BIOS settings,
you are ready to install Windows 2000/XP onto your SATA hard drive with the driver. The following is
an example of Windows XP installation.
Step 1: Restart your system to boot from the Windows 2000/XP Setup disk and press F6
as soon as you see the "Press F6 if you need to install a 3rd party SCSI or RAID driver" message
(Figure 20). After pressing F6, there will be a few moments of some files being loaded before you see
the next screen.
