Gigabyte MC62-G40, Руководство пользователя

Страница: 73 / 99

- 73 -
BIOS Setup
Parameter
Description
Data Eye
(Continued)
Š
Aggressor Channel
– This item helps read the aggressors channels.
– Options available: Disabled, 1 Aggressor Channel, 3 Aggressor
Channels, 7 Aggressor Channels. Default setting is 1 Aggressor
Channel .
Š
Aggressor Static Lane Control
– Enable/Disable the Aggressor Static Lane Control function.
– Options available: Enabled, Disabled. Default setting is Disabled .
Š
Aggressor Static Lane Select Upper 32 bits
(Note1)
Š
Aggressor Static Lane Select Lower 32 bits
(Note1)
Š
Aggressor Static Lane Select ECC
(Note1)
Š
Aggressor Static Lane Value
(Note1)
Š
Target Static Lane Control
– Enable/Disable the Target Static Lane Control function.
– Options available: Enabled, Disabled. Default setting is Disabled .
Š
Target Static Lane Select Upper 32 bits
(Note2)
Š
Target Static Lane Select Lower 32 bits
(Note2)
Š
Target Static Lane Select ECC
(Note2)
Š
Target Static Lane Value
(Note2)
Š
Worst Case Margin Granularity
– Options available: Per Chip Select, Per Nibble. Default setting is Per
Chip Select .
Š
Read Voltage Sweep Step Size
– Options available: 1, 2, 4. Default setting is 1 .
Š
Read Timing Sweep Step Size
– Options available: 1, 2, 4. Default setting is 1 .
Š
Write Voltage Sweep Step Size
– Options available: 1, 2, 4. Default setting is 1 .
Š
Write Timing Sweep Step Size
– Options available: 1, 2, 4. Default setting is 1 .
(Note1) This item is configurable when Aggressor Static Lane Control is set to Enabled .
(Note2) This item is configurable when Target Static Lane Control is set to Enabled .