Gigabyte GV-RX13128D-RH, Руководство пользователя

Страница: 9 / 40

Hardware Installation
- 7 -
English
2. Replace the screws to fasten the card in
place, and replace the computer cover.
3. Plug the display cable into your card; then
turn on the computer and monitor. If your
graphics card came with a DVI-I connector,
you can connect a flat panel display to the
appropriate connector, as shown below...
You are now ready to proceed with the installation of the graphics card driver. Please
refer to next chapter for detailed instructions.
To TV/VCR
To VGA Monitor
To Flat Panel Display
To install your new graphics card:
1. Locate one PCI Express x 16 slot. If
necessary, remove the metal cover from the
slot; then align your graphics card with the
PCI Express x 16 slot, and press it in firmly
until the card is fully seated.
* Please make sure that the gold edge connectors of the graphics card is securely inserted.