manualshive.com logo in svg

Gigabyte GS-R22PFL, Руководство по обслуживанию, Страница: 49 / 72

Поделиться
Скачать
Gigabyte GS-R22PFL Скачать руководство пользователя страница 49

- 49 -

BIOS Setup

5-2-5  SATA Configuration

  SATA Port 0/1/2/3/4/5 

(Note)

  

 

Displays the installed HDD devices information. 

  SATA Mode  

 

Select the on chip SATA type.  

 

IDE Mode: When set to IDE, the SATA controller disables its RAID and AHCI functions and runs in the 

IDE emulation mode. This is not allowed to access RAID setup utility.  

 

RAID Mode: When set to RAID, the SATA controllerenables both its RAID and AHCI functions. You will 

be allows access the RAID setup utility at boot time.  

 

AHCI Mode: When set to AHCI,the SATA controller enables its AHCI functionality. Then the RAID 

 

function is disabled and cannot be access the RAID setup utility at boot time. 

 

Options available: IDE/RAID/AHCI/Disabled. Default setting is 

IDE Mode

.

  Serial ATA Controller 0/1  

 

Determine the onboard SATA controller mode.

 

Compatible: SATA and PATA drives are auto-detected and placed in Legacy mode.

 

Enhanced: SATA and PATA drives are auto-detected and placed inNative mode.

 

Options available: Disabled/Enhanced/Compatible. 

 

Default setting  for Serial ATA 0 is 

Compatible

.

 

Default setting  for Serial ATA 1 is 

Enhanced

.

(Note)  This item is will not appear when the SATA mode is set ot RAID mode. 

Содержание GS-R22PFL









































































Отзывы:

Нет отзывов