Gigabyte GS-R22PFL Скачать руководство пользователя страница 38

BIOS Setup

- 38 -

 Main 

 

This setup page includes all the items in standard compatible BIOS.

 Advanced

 

This setup page includes all the items of AMI BIOS special enhanced features. 

 

(ex: Auto detect fan and temperature status, automatically configure hard disk parameters.)

 Chipset

 

This setup page includes all the submenu options for configuring the function of North Bridge and South 

Bridge.

 

(ex: Auto detect fan and temperature status, automatically configure hard disk parameters.)

 Security

 

Change, set, or disable supervisor and user password. Configuration supervisor password allows you to 

restrict access to the system and BIOS Setup. 

 

A supervisor password allows you to make changes in BIOS Setup. 

 

A user password only allows you to view the BIOS settings but not to make changes.

  Server Management 

 

Server additional features enabled/disabled setup menus.

  Boot Options

 

This setup page provides items for configuration of  boot sequence. 

  Boot Manager

 

This setup page provides configuration of boot up devices.

 Exit

 

Save all the changes made in the BIOS Setup program to the CMOS and exit BIOS Setup. (Pressing 
<F10> can also carry out this task.) 

 

Abandon all changes and the previous settings remain in effect. Pressing <Y> to the confirmation mes

-

sage will exit BIOS Setup. (Pressing <Esc> can also carry out this task.)

Содержание GS-R22PFL









































































Отзывы: