Gigabyte GS-R22PFL Скачать руководство пользователя страница 11

Страница: 11 / 72

- 11 -

Hardware Installation

1-2 Product Specifications

CPU

Support for Dual Intel

Xeon

E5-2400 processors in 1356 sockets

Intel

Xeon

Quad/Eight Core in LGA 1356 socket

Supports QuickPath Interconnect up to 8GT/s

Enhanced Intel SpeedStep Technology (EIST) & Demand BasedSwitch (DBS)

Enhanced Intel SpeedStep Technology (EIST)

Support Intel Virtualization Technology (VT)

Chipset

Intel

C602 (Patsburg) Chipset

Memory

12 x 1.5V DDR3 DIMM sockets supporting up to 384 GB of systemmemory

12 x 1.35V DDR3L DIMM sockets supporting up to 384 GB of system memory

3 channel memory architecture

Support for 1066/1333/1600 memory modules

Support for ECC RDIMM/ UDIMM memory modules

LAN

2 x Intel

82574L supports 10/100/1000 Mbps

1 x KVM management LAN port

Expansion Slot

2 x PCI Express x16 slot, running at x16 (Gen3/PCIE_1/PCIE_2)

1 x PCI Express x8 slot, running at x4 (Gen3/PCIE_3)

1 x PCI Express x8 slot, running at x4 (Gen3/PCIE_4)

1 x PCI Express x4 slot, running at x1 (Gen2/PCIE_5)

Onboard
Graphics

ASPEED

AST2300 supports 128MB VRAM

Mass Storage

12 x 3.5” Hot-Swap SATA HDDs (GS-R22PXL)

24 x 2.5” Hot-Swap SATA HDDs (GS-R22PFL)

Support for Intel IRST SATA RAID 0, RAID 1, RAID 5, RAID 10

System Fans

4 x 80x80x38mm 9000rpm

USB

Up to 8 USB 2.0/1.1 ports (4 on the back panel, 4 additional ports via the USB
brackets connected to the internal USB headers)

Internal
Connectors

1 x 24-pin ATX main power connector

2 x 8-pin ATX 12V power connector

2 x Mini SAS connectors

2 x SATA 6Gb/s connectors

4 x SATA 3Gb/s connectors

1 x PMBus header

2 x CPU fan header

4 x System fan header

1 x Front panel header

2 x USB 2.0/1.1 header

1 x TPM header

1 x RAID KEY header

1 x Serial port header

1 x IPMB header

1 x SATA SPGIO header

Содержание GS-R22PFL









































































Результаты поиска

Содержание GS-R22PFL

Отзывы:

Gigabyte GS-R22PFL, Руководство по обслуживанию, Страница: 11 / 72

Результаты поиска

Содержание GS-R22PFL

Отзывы: