Gigabyte GA-Z68X-UD4-B3, Руководство пользователя

Страница: 43 / 116

- 43 - BIOS Setup
tRFC
Options are: Auto (default), 1~255.
tRTP
Options are: Auto (default), 1~15.
tFAW
Options are: Auto (default), 1~63.
Command Rate(CMD)
Options are: Auto (default), 1~3.
>>>>> Channel A/B Misc Timing Control
IO Latency
Options are: Auto (default), 1~31.
Round Trip Latency
Options are: Auto (default), 1~255.

Advanced Voltage Settings
>>> CPU
Multi-Steps Load-Line
Enables or disables Load-Line Calibration. This item allows you to adjust Vdroop at different levels. En-
abling Load-Line Calibration may keep the CPU voltage more constant under light and heavy CPU load.
Disabled Disables Load-Line Calibration and sets VDroop following Intel specifications.
(Default)
Level 1~Level 10 Enables Load-Line Calibration and adjusts VDroop by ten levels.
CPU Vcore
The default is Auto .
Dynamic Vcore(DVID)
This option is configurable only when CPU Vcore is set to Normal . The default is Auto .
QPI/Vtt Voltage
The default is Auto .
System Agent Voltage
The default is Auto .
CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
Advanced Voltage Settings
****** Mother Board Voltage Control ******
Voltage Types Normal Current
-----------------------------------------------------------------------------
>>> CPU
Multi-Steps Load-Line [Disabled]
CPU Vcore 1.220V [Auto]
x Dynamic Vcore(DVID) +0.000V Auto
QPI/Vtt Voltage 1.050V [Auto]
System Agent Voltage 0.920V [Auto]
>>> MCH/ICH
CPU PLL 1.800V [Auto]
>>> DRAM
DRAM Voltage 1.500V [Auto]
DRAM VRef. 0.750V [Auto]
DRAM Termination 0.750V [Auto]
Ch-A Data VRef. 0.750V [Auto]
Ch-B Data VRef. 0.750V [Auto]
Ch-A Address VRef. 0.750V [Auto]
Ch-B Address VRef. 0.750V [Auto]
higf
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level
