Gigabyte GA-H87-HD3 Скачать руководство пользователя страница 26

Страница: 26 / 100

- 26 -

Hardware Installation

9) F_AUDIO (Front Panel Audio Header)

The front panel audio header supports Intel High Definition audio (HD) and AC'97 audio. You may connect

your chassis front panel audio module to this header. Make sure the wire assignments of the module

connector match the pin assignments of the motherboard header. Incorrect connection between the module

connector and the motherboard header will make the device unable to work or even damage it.

•

The front panel audio header supports HD audio by default. If your chassis provides an AC'97

front panel audio module, refer to the instructions on how to activate AC'97 functionality via the

audio software in Chapter 6, "Configuring 2/4/5.1/7.1-Channel Audio."

•

Audio signals will be present on both of the front and back panel audio connections simultaneously.

If you want to mute the back panel audio (only supported when using an HD front panel audio

module), refer to Chapter 6, "Configuring 2/4/5.1/7.1-Channel Audio."

•

Some chassis provide a front panel audio module that has separated connectors on each wire

instead of a single plug. For information about connecting the front panel audio module that has

different wire assignments, please contact the chassis manufacturer.

For HD Front Panel Audio: For AC'97 Front Panel Audio:

Pin No. Definition

MIC2_L

GND

MIC2_R

-ACZ_DET

LINE2_R

GND

FAUDIO_JD

No Pin

LINE2_L

GND

Pin No. Definition

MIC

GND

MIC Power

Line Out (R)

No Pin

Line Out (L)

F_USB30

F_AUDIO(H)

DB_PORT

F_PANEL(NH)

F_PANEL

(H61M-D2)

TPM

w/housing

10) SPDIF_IN (S/PDIF In Header)

This header supports digital S/PDIF In and can connect to an audio device that supports digital audio out via

an optional S/PDIF In cable. For purchasing the optional S/PDIF In cable, please contact the local dealer.

Pin No. Definition

Power

SPDIFI

GND

Содержание GA-H87-HD3





































































































Результаты поиска

Содержание GA-H87-HD3

Отзывы:

Похожие инструкции для GA-H87-HD3

Бренды по названию

Популярные бренды

Gigabyte GA-H87-HD3, Руководство пользователя

Результаты поиска

Содержание GA-H87-HD3

Отзывы:

Похожие инструкции для GA-H87-HD3

Бренды по названию

Популярные бренды