Gigabyte GA-H87-HD3 Скачать руководство пользователя страница 20

Страница: 20 / 100

- 20 -

Hardware Installation

Center/Subwoofer Speaker Out Jack (Orange)

Use this audio jack to connect center/subwoofer speakers in a 5.1/7.1-channel audio configuration.

Rear Speaker Out Jack (Black)

This jack can be used to connect front speakers in a 4/5.1/7.1-channel audio configuration.

Side Speaker Out Jack (Gray)

Use this audio jack to connect side speakers in a 7.1-channel audio configuration.

Line In Jack (Blue)

The default line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc.

Line Out Jack (Green)

The default line out jack. Use this audio jack for a headphone or 2-channel speaker. This jack can be used

to connect front speakers in a 4/5.1/7.1-channel audio configuration.

Mic In Jack (Pink)

The default Mic in jack. Microphones must be connected to this jack.

Activity LED

Connection/

Speed LED

LAN Port

Activity LED:

Connection/Speed LED:

State

Description

Orange

1 Gbps data rate

Green

100 Mbps data rate

Off

10 Mbps data rate

State

Description

Blinking

Data transmission or receiving is occurring

Off

No data transmission or receiving is occurring

USB 3.0/2.0 Port

The USB 3.0 port supports the USB 3.0 specification and is compatible to the USB 2.0/1.1 specification.

Use this port for USB devices such as a USB keyboard/mouse, USB printer, USB flash drive and etc.

RJ-45 LAN Port

The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following

describes the states of the LAN port LEDs.

Triple-Display Configurations for the Onboard Graphics:

Triple-display configurations are supported after you install motherboard drivers in OS. Only dual-display

configurations are supported during the BIOS Setup or POST process.

The audio jacks can be reconfigured to perform different functions via the audio software(supported

functions for each jack may vary based on hardware specification).

Only microphones still MUST

be connected to the default Mic in jack.

Refer to the instructions on setting up a 2/4/5.1/7.1-channel

audio configuration in Chapter 6, "Configuring 2/4/5.1/7.1-Channel Audio."

Содержание GA-H87-HD3





































































































Результаты поиска

Содержание GA-H87-HD3

Отзывы:

Похожие инструкции для GA-H87-HD3

Бренды по названию

Популярные бренды

Gigabyte GA-H87-HD3, Руководство пользователя

Результаты поиска

Содержание GA-H87-HD3

Отзывы:

Похожие инструкции для GA-H87-HD3

Бренды по названию

Популярные бренды