Gigabyte GA-H55M-D2H, Руководство пользователя

Страница: 30 / 96

- 30 - Hardware Installation
16) CLR_CMOS (Clearing CMOS Jumper)
Use this jumper to clear the CMOS values (e.g. date information and BIOS configurations) and reset
the CMOS values to factory defaults. To clear the CMOS values, place a jumper cap on the two pins to
temporarily short the two pins or use a metal object like a screwdriver to touch the two pins for a few
seconds.
• Always turn off your computer and unplug the power cord from the power outlet before clear-
ing the CMOS values.
• After clearing the CMOS values and before turning on your computer, be sure to remove the
jumper cap from the jumper. Failure to do so may cause damage to the motherboard.
• After system restart, go to BIOS Setup to load factory defaults (select Load Optimized De-
faults ) or manually configure the BIOS settings (refer to Chapter 2, "BIOS Setup, " for BIOS
configurations).
Open: Normal
Short: Clear CMOS Values
17) PHASE LED
The number of lighted LEDs indicates the CPU loading. The higher the CPU loading, the more the
number of lighted LEDs. To enable the Phase LED display function, please first enable Dynamic Energy
Saver
™
2. Refer to Chapter 4, "Dynamic Energy Saver
™
2," for more details.