Gigabyte GA-F2A88X-D3HP, Руководство пользователя

Страница: 25 / 96

- 25 - Hardware Installation
6) SATA3 0/1/2/3/4/5/6/7 (SATA 6Gb/s Connectors)
The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA
1.5Gb/s standard. Each SATA connector supports a single SATA device. The AMD Chipset supports RAID
0, RAID 1, RAID 5, RAID 10, and JBOD. Refer to Chapter 3, "Coniguring a RAID Set," for instructions on
coniguring a RAID array.
Pin No.
Deinition
1 GND
2 TXP
3 TXN
4 GND
5
RXN
6
RXP
7 GND
7) CLR_CMOS (Clear CMOS Jumper)
Use this jumper to clear the BIOS coniguration and reset the CMOS values to factory defaults. To clear
the CMOS values, use a metal object like a screwdriver to touch the two pins for a few seconds.
•
Always turn off your computer before clearing the CMOS values.
•
After system restart, go to BIOS Setup to load factory defaults (select Load Optimized Defaults) or
manually conigure the BIOS settings (refer to Chapter 2, "BIOS Setup," for BIOS conigurations).
Open: Normal
Short: Clear CMOS Values
To enable hot-plugging for the SATA ports, refer to Chapter 2, "BIOS Setup," "Peripherals\SB SATA
Coniguration," for more information.
SATA3
1 3 5
0 2 4
7 1
G.QBOFM G.QBOFM G.QBOFM
7 1
G.QBOFM G.QBOFM G.QBOFM
7
7
G.QBOFM
1
1
6
7
SATA3