Gigabyte GA-8I955X Royal Скачать руководство пользователя страница 37

Страница: 37 / 88

BIOS Setup

- 37 -

English

On-Chip SATA Mode

Disabled

Disable this function.

Auto

BIOS will detect automatically. (Default value)

Combined

Set On-Chip SATA mode to Combined, you can use up to 4 HDDs on the
motherboard; 2 for SATA and the other for PATA IDE.

Enhanced

Set On-Chip SATA mode to Enhanced, the motherboard allows up to 6 HDDs
to use.

Non-Combined

Set On-Chip SATA mode to Non-Combined, SATA will be simulated to PATA
mode.

PATA IDE Set to

Ch.1 Master/Slave Set PATA IDE to Ch. 1 Master/Slave. (Default value)
Ch.0 Master/Slave Set PATA IDE to Ch. 0 Master/Slave.

SATA Port 0/2 Set to

This value will be automatically made by the setting "On-Chip SATA Mode" and "PATA IDE Set

to". If PATA IDE were set to Ch. 1 Master/Slave, this function will auto set to Ch. 0 Master/Slave.

SATA Port 1/3 Set to

This value will be automatically made by the setting "On-Chip SATA Mode" and "PATA IDE Set

to". If PATA IDE were set to Ch. 0 Master/Slave, this function will auto set to Ch. 1 Master/Slave.

USB Controller

Enabled

Enable USB controller. (Default value)

Disabled

Disable USB controller.

USB 2.0 Controller

Disable this function if you are not using onboard USB 2.0 feature.

Enabled

Enable USB 2.0 controller. (Default value)

Disabled

Disable USB 2.0 controller.

USB Keyboard Support

Enabled

Enable USB keyboard support.

Disabled

Disable USB keyboard support. (Default value)

USB Mouse Support

Enabled

Enable USB mouse support.

Disabled

Disable USB mouse support. (Default value)

Azalia Codec

Auto

Auto detect Azalia audio function. (Default value)

Disabled

Disable Azalia audio function.

Onboard H/W 1394

Enabled

Enable onboard IEEE 1394 function. (Default value)

Disabled

Disable this function.

Onboard H/W SATA

Enabled

Enable onboard H/W SATA function. (Default value)

Disabled

Disable this function.

H/W SATA Function

RAID

Set onboard H/W SATA function as RAID. (Default value)

BASE

Set onboard H/W SATA function as BASE(ATA).

Only for GA-8I955X Royal.

Содержание GA-8I955X Royal

























































































Результаты поиска

Содержание GA-8I955X Royal

Отзывы:

Бренды по названию

Популярные бренды

Gigabyte GA-8I955X Royal, Руководство пользователя

Результаты поиска

Содержание GA-8I955X Royal

Отзывы:

Бренды по названию

Популярные бренды