manualshive.com logo in svg

Gigabyte GA-8I955X Royal, Руководство пользователя

Поделиться
Скачать
Gigabyte GA-8I955X Royal Скачать руководство пользователя страница 20

GA-8I955X Royal/GA-8I955X Pro Motherboard - 20 -

English

1

4

5

8

1/2)

ATX_12V_2X4/ATX (Power Connector)

With the use of the power connector, the power supply can supply enough stable power to all
the components on the motherboard. Before connecting the power connector, please make sure
that all components and devices are properly installed.  Align the power connector with its
proper location on the motherboard and connect tightly.
The ATX 12V (2x4) power connector mainly supplies power to the CPU. If the ATX 12V (2x4)
power connector is not connected, the system will not start. To install a power supply
providing ATX 12V (2x2) power connector, please connect the ATX 12V power connector to
the Pin 3, 4, 7, 8 of the onboard ATX_12V_2X4 power connector according to the pin definitions.

Important  

Use of a power supply providing an ATX 12V (2x4) power connector is recom-

mended by processor manufacturer when using Intel Pentium D Extreme Edition processor.
Caution!  Please use a power supply that is able to handle the system voltage requirements.  It
is recommended that a power supply that can withstand high power consumption be used
(300W or greater).  If a power supply is used that does not provide the required power, the result
can lead to an unstable system or a system that is unable to start. If you use a power supply
that provides a 24-pin ATX or 2x4 pin ATX 12V power connector, please remove the small
cover on the power connector on the motherboard before plugging in the power cord; otherwise,
please do not remove it.

13

1

24

12

Pin No.

Definition

13

3.3V

14

-12V

15

GND

16

PS_ON(soft On/Off)

17

GND

18

GND

19

GND

20

-5V

21

+5V

22

+5V

23

+5V (Only for 24-pin  ATX)

24

GND(Only for 24-pin  ATX)

Pin No.

Definition

1

3.3V

2

3.3V

3

GND

4

+5V

5

GND

6

+5V

7

GND

8

Power Good

9

5V SB(stand by +5V)

10

+12V

11

+12V(Only for 24-pin  ATX)

12

 3.3V(Only for 24-pin  ATX)

Pin No.

Definition

1

GND

2

GND

3

GND

4

GND

5

+12V

6

+12V

7

+12V

8

+12V

Содержание GA-8I955X Royal

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды