Gigabyte GA-8I925XC-G Скачать руководство пользователя страница 37

Страница: 37 / 88

BIOS Setup

- 37 -

English

Enhanced

Set On-Chip SATA mode to Enhanced, the motherboard allows up to 6 HDDs
to use.

Non-Combined

Set On-Chip SATA mode to Non-Combined, SATA will be simulated to PATA
mode.

PATA IDE Set to

Ch.1 Master/Slave Set PATA IDE to Ch. 1 Master/Slave. (Default value)
Ch.0 Master/Slave Set PATA IDE to Ch. 0 Master/Slave.

SATA Port 0/2 Set to

This value will auto make by the setting "On-Chip SATA Mode" and "PATA IDE Set to".

If PATA IDE were set to Ch. 1 Master/Slave, this function will auto set to Ch. 0 Master/Slave.

SATA Port 1/3 Set to

This value will auto make by the setting "On-Chip SATA Mode" and "PATA IDE Set to".

If PATA IDE were set to Ch. 0 Master/Slave, this function will auto set to Ch. 1 Master/Slave.

USB Controller

Enabled

Enable USB controller. (Default value)

Disabled

Disable USB controller.

USB 2.0 Controller

Disable this function if you are not using onboard USB 2.0 feature.

Enabled

Enable USB 2.0 dontroller. (Default value)

Disabled

Disable USB 2.0 controller.

USB Keyboard Support

Enabled

Enable USB keyboard support.

Disabled

Disable USB keyboard support. (Default value)

USB Mouse Support

Enabled

Enable USB mouse support.

Disabled

Disable USB mouse support. (Default value)

Azalia Codec

Auto

Auto detect Azalia audio function. (Default value)

Disabled

Disable Azalia audio function.

Front Panel Type

If you connect HD Audio Panel to the AZALIA_FP connector, set this item to

HD Audio

. If you

connect AC97 Audio Panel to the AZALIA_FP connector, set this item to

AC97

AC97

Set front audio panel type to AC97.

HD Audio

Set front audio panel type to HD Audio. (Default value)

Onboard H/W 1394

Enabled

Enable onboard IEEE 1394 function. (Default value)

Disabled

Disable this function.

Onboard H/W GigaRAID

Enabled

Enable onboard H/W GigaRAID function. (Default value)

Disabled

Disable this function.

GigaRAID Function

RAID

Select onboard GigaRAID chip function as RAID. (Default value)

ATA

Select onboard GigaRAID chip function as ATA.

Содержание GA-8I925XC-G

























































































Результаты поиска

Содержание GA-8I925XC-G

Отзывы:

Бренды по названию

Популярные бренды

Gigabyte GA-8I925XC-G, Руководство пользователя

Результаты поиска

Содержание GA-8I925XC-G

Отзывы:

Бренды по названию

Популярные бренды