Gigabyte GA-880GMA-USB3 Скачать руководство пользователя | Manualshive

Страница: 44 / 100

background image

BIOS Setup

- 44 -

Hard Disk Boot Priority

Specifies the sequence of loading the operating system from the installed hard drives. Use the up or

down arrow key to select a hard drive, then press the plus key <+> (or <PageUp>) or the minus key <-> (or

<PageDown>) to move it up or down on the list. Press <Esc> to exit this menu when finished.

First/Second/Third Boot Device

Specifies the boot order from the available devices. Use the up or down arrow key to select a device

and press <Enter> to accept. Options are: LS120, Hard Disk, CDROM, ZIP, USB-FDD, USB-ZIP, USB-
CDROM, USB-HDD, Legacy LAN, Disabled.

Password Check

Specifies whether a password is required every time the system boots, or only when you enter BIOS
Setup. After configuring this item, set the password(s) under the

Set Supervisor/User Password

item in

the BIOS Main Menu.

Setup

A password is only required for entering the BIOS Setup program. (Default)

System

A password is required for booting the system and for entering the BIOS Setup

program.

HDD S.M.A.R.T. Capability

Enables or disables the S.M.A.R.T. (Self Monitoring and Reporting Technology) capability of your hard
drive. This feature allows your system to report read/write errors of the hard drive and to issue warnings
when a third party hardware monitor utility is installed. (Default: Disabled)

Away Mode

Enables or disables Away Mode in Windows XP Media Center operating system. Away Mode allows the
system to silently perform unattended tasks while in a low-power mode that appears off.

(Default: Disabled)

Full Screen LOGO Show

Allows you to determine whether to display the GIGABYTE Logo at system startup.

Disabled

displays

normal POST message. (Default: Enabled)

Backup BIOS Image to HDD

Allows the system to copy the BIOS image file to the hard drive. If the system BIOS is corrupted, it will
be recovered from this image file. (Default: Disabled)

Init Display First

Specifies the first initiation of the monitor display from the installed PCI graphics card, PCI Express

graphics card, or the onboard graphics.

PCI Slot

Sets the PCI graphics card as the first display. (Default)

OnChipVGA Sets the onboard graphics as the first display.

PEG

Sets the PCI Express graphics card on the PCIEX16 slot as the first display.

«
...
42
43
44
45
46
...
»

Содержание GA-880GMA-USB3





































































































Отзывы:

Нет отзывов

Похожие инструкции для GA-880GMA-USB3

Бренд: IEI Technology Страницы: 177

Бренд: Ublox Страницы: 2

Бренд: u-blox Страницы: 24

Бренд: Zapi Страницы: 50

Бренд: MSI Страницы: 35

Бренд: Supero Страницы: 105

Бренд: AKM Страницы: 34

Бренд: MSI Страницы: 36

Бренд: IEI Technology Страницы: 8

Бренд: QDI Страницы: 85

Бренд: BCM Страницы: 5

Бренд: Nuvoton Страницы: 14

Бренд: ON Semiconductor Страницы: 19

Бренд: BCM Страницы: 3

Бренд: Microchip Technology Страницы: 31

Бренд: Texas Instruments Страницы: 25

Бренд: ISSC Страницы: 39

Бренд: Caji Страницы: 19

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды