Gigabyte GA-880GMA-USB3 Скачать руководство пользователя

Страница: 22 / 100

Hardware Installation

- 22 -

In addition to the default speakers settings, the ~

audio jacks can be reconfigured to perform

different functions via the audio software. Only microphones still MUST be connected to the
default Mic in jack ( ). Refer to the instructions on setting up a 2/4/5.1/7.1-channel audio con-

figuration in Chapter 5, "Configuring 2/4/5.1/7.1-Channel Audio."

Center/Subwoofer Speaker Out Jack (Orange)

Use this audio jack to connect center/subwoofer speakers in a 5.1/7.1-channel audio configuration.

Rear Speaker Out Jack (Black)

Use this audio jack to connect rear speakers in a 7.1-channel audio configuration.

Side Speaker Out Jack (Gray)

Use this audio jack to connect side speakers in a 4/5.1/7.1-channel audio configuration.

Line In Jack (Blue)

The default line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc.

Line Out Jack (Green)

The default line out jack. Use this audio jack for a headphone or 2-channel speaker. This jack can be

used to connect front speakers in a 4/5.1/7.1-channel audio configuration.

Mic In Jack (Pink)

The default Mic in jack. Microphones must be connected to this jack.

Содержание GA-880GMA-USB3





































































































Результаты поиска

Содержание GA-880GMA-USB3

Отзывы:

Похожие инструкции для GA-880GMA-USB3

Бренды по названию

Популярные бренды

Gigabyte GA-880GMA-USB3, Руководство пользователя

Результаты поиска

Содержание GA-880GMA-USB3

Отзывы:

Похожие инструкции для GA-880GMA-USB3

Бренды по названию

Популярные бренды